INSTALL A NEON LED SIGN BY MOUNTING SCREWS

Mounting screws (our default option) is the most popular choice among installation options. It works great for surface installations such as walls and flower/grass backdrops. Please note, the surface must can be drilled. Once you installed your neon sign by mounting screws, you can't move it around easily and frequently. Suppose one day, you want to move it to another place, the old spot will leave holes.

1. MARK THE SPOT.

Place your neon sign against the wall. Using a pencil, mark the spot through the holes on acrylic board.

2. DRILL HOLES ON WALL.

Drill holes at each marked spot. Please drill slowly and steadily.

3. FIX SCREW NUT INTO WALL.

Put the wall anchor into the holes, then drill the screw through the hollow base and into the wall anchor.

4. CONNECT CREW CUP AND SCREW NUT TIGHTLY.

Put a cushion on the screw nut and then place your neon sign against it. Make sure the holes on acrylic board are on the right position to screw nut.
Put a cushion on acrylic backboard and connect crew up and screw nut tightly.

5. PLUG IN AND ENJOY YOUR NEON SIGN.

 

INSTALL A NEON LED SIGN BY STEEL WIRE HANGING